Building from Source

Building the Greenbone Community Edition from source requires knowledge about:

  • Using a terminal

  • Shell programming basics

  • Installing software via apt or dnf

  • Using a C compiler

  • Using CMake and make

  • The Linux File System Hierarchy

  • Running services via systemd

Additionally, a basic knowledge about the architecture of the Greenbone Community Edition is required to follow this guide.

Note

This guide is intended for developers who want to try out the newest features and/or want to get familiar with the source code. It is not intended for production setups.

Currently the docs support the following distributions

  • Debian stable (bookworm)

  • Ubuntu 22.04 LTS

  • Fedora 38

  • CentOS 9 Stream

Most likely, other Debian derivatives like Mint and Kali will also work with only minor adjustments required.

Hardware Requirements

Minimal:

  • CPU Cores: 2

  • Random-Access Memory: 4GB

  • Hard Disk: 20GB free

Recommended:

  • CPU Cores: 4

  • Random-Access Memory: 8GB

  • Hard Disk: 60GB free

Prerequisites

Note

Please follow the guide step by step. Later steps might require settings or output of a previous command.

The command sudo is used for executing commands that require privileged access on the system.

Creating a User and a Group

The services provided by the Greenbone Community Edition should run as a dedicated user and group. Therefore a gvm user and a group with the same name will be created.

Creating a gvm system user and group
sudo useradd -r -M -U -G sudo -s /usr/sbin/nologin gvm

Adjusting the Current User

To allow the current user to run gvmd he must be added to the gvm group. To make the group change effective either logout and login again or use su.

Add current user to gvm group
sudo usermod -aG gvm $USER

su $USER

Choosing an Install Prefix

Before building the software stack, a (root) directory must be chosen where the built software will finally be installed. For example, when building packages, the distribution developers set this path to /usr.

By default, it is /usr/local which is also used in this guide. This directory will be stored in an environment variable INSTALL_PREFIX to be able to reference it later.

Setting an install prefix environment variable
export INSTALL_PREFIX=/usr/local

Setting the PATH

On Debian systems the locations /sbin, /usr/sbin and /usr/local/sbin are not in the PATH of normal users. To run gvmd which is located in /usr/local/sbin the PATH environment variable should be adjusted.

Adjusting PATH for running gvmd
export PATH=$PATH:$INSTALL_PREFIX/sbin

Creating a Source, Build and Install Directory

To separate the sources and the build artifacts, a source and a build directory must be created.

This source directory will be used later in this guide via an environment variable SOURCE_DIR. Accordingly, a variable BUILD_DIR will be set for the build directory. Both can be set to any directory to which the current user has write permissions. Therefore directories in the current user’s home directory are chosen in this guide.

Choosing a source directory
export SOURCE_DIR=$HOME/source
mkdir -p $SOURCE_DIR
Choosing a build directory
export BUILD_DIR=$HOME/build
mkdir -p $BUILD_DIR

Additionally, an install directory will be set as an environment variable INSTALL_DIR. It is used as a temporary installation directory before moving all built artifacts to the final destination.

Choosing a temporary install directory
export INSTALL_DIR=$HOME/install
mkdir -p $INSTALL_DIR

Choosing the Installation Source

For building the GVM software stack, three different sources can be chosen depending on the desired stability:

  • Building from release tarballs

  • Building from git tags

  • Building from release branches

Linux distributions use the release tarballs because it is the most common and well known method to share source code.

Newer build systems may stick with the git tags.

If you are a developer and very familiar with building from source already, you may also try out using the git release branches. These have the advantage that they contain the newest fixes which may not yet be included in the release tarballs or git tags. As a downside, the release branches may contain only partially fixed issues and need to be updated more often.

This guide will use the tarballs to build the software.

Installing Common Build Dependencies

For downloading, configuring, building and installing the Greenbone Community Edition components, several tools and applications are required. To install this requirements the following commands can be used:

Installing common build dependencies
sudo apt update
sudo apt install --no-install-recommends --assume-yes \
  build-essential \
  curl \
  cmake \
  pkg-config \
  python3 \
  python3-pip \
  gnupg

Importing the Greenbone Signing Key

To validate the integrity of the downloaded source files, GnuPG is used. It requires downloading the Greenbone Community Signing public key and importing it into the current user’s keychain.

Importing the Greenbone Community Signing key
curl -f -L https://www.greenbone.net/GBCommunitySigningKey.asc -o /tmp/GBCommunitySigningKey.asc
gpg --import /tmp/GBCommunitySigningKey.asc

For understanding the validation output of the gpg tool, it is best to mark the Greenbone Community Signing key as fully trusted.

Setting the trust level for the Greenbone Community Signing key
echo "8AE4BE429B60A59B311C2E739823FAA60ED1E580:6:" | gpg --import-ownertrust

Building and Installing the Components

Note

The components should be build and installed in the listed order.

gvm-libs

gvm-libs is a C library providing basic functionality like XML parsing and network communication. It is used in openvas-scanner, gvmd, gsad and pg-gvm.

Setting the gvm-libs version to use
export GVM_LIBS_VERSION=22.10.0
Required dependencies for gvm-libs
sudo apt install -y \
  libglib2.0-dev \
  libgpgme-dev \
  libgnutls28-dev \
  uuid-dev \
  libssh-gcrypt-dev \
  libhiredis-dev \
  libxml2-dev \
  libpcap-dev \
  libnet1-dev \
  libpaho-mqtt-dev
Optional dependencies for gvm-libs
sudo apt install -y \
  libldap2-dev \
  libradcli-dev
Downloading the gvm-libs sources
curl -f -L https://github.com/greenbone/gvm-libs/archive/refs/tags/v$GVM_LIBS_VERSION.tar.gz -o $SOURCE_DIR/gvm-libs-$GVM_LIBS_VERSION.tar.gz
curl -f -L https://github.com/greenbone/gvm-libs/releases/download/v$GVM_LIBS_VERSION/gvm-libs-v$GVM_LIBS_VERSION.tar.gz.asc -o $SOURCE_DIR/gvm-libs-$GVM_LIBS_VERSION.tar.gz.asc
Verifying the source file
gpg --verify $SOURCE_DIR/gvm-libs-$GVM_LIBS_VERSION.tar.gz.asc $SOURCE_DIR/gvm-libs-$GVM_LIBS_VERSION.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signature is valid, the tarball can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/gvm-libs-$GVM_LIBS_VERSION.tar.gz

Afterwards, gvm-libs can be build and installed.

Building gvm-libs
mkdir -p $BUILD_DIR/gvm-libs && cd $BUILD_DIR/gvm-libs

cmake $SOURCE_DIR/gvm-libs-$GVM_LIBS_VERSION \
  -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX \
  -DCMAKE_BUILD_TYPE=Release \
  -DSYSCONFDIR=/etc \
  -DLOCALSTATEDIR=/var

make -j$(nproc)
Installing gvm-libs
mkdir -p $INSTALL_DIR/gvm-libs

make DESTDIR=$INSTALL_DIR/gvm-libs install

sudo cp -rv $INSTALL_DIR/gvm-libs/* /

gvmd

The Greenbone Vulnerability Management Daemon (gvmd) is the main service of the Greenbone Community Edition. It handles authentication, scan management, vulnerability information, reporting, alerting, scheduling and much more. As a storage backend, it uses a PostgreSQL database.

Setting the gvmd version to use
export GVMD_VERSION=23.8.1
Required dependencies for gvmd
sudo apt install -y \
  libglib2.0-dev \
  libgnutls28-dev \
  libpq-dev \
  postgresql-server-dev-15 \
  libical-dev \
  xsltproc \
  rsync \
  libbsd-dev \
  libgpgme-dev
Optional dependencies for gvmd
sudo apt install -y --no-install-recommends \
  texlive-latex-extra \
  texlive-fonts-recommended \
  xmlstarlet \
  zip \
  rpm \
  fakeroot \
  dpkg \
  nsis \
  gnupg \
  gpgsm \
  wget \
  sshpass \
  openssh-client \
  socat \
  snmp \
  python3 \
  smbclient \
  python3-lxml \
  gnutls-bin \
  xml-twig-tools

Details about the optional dependencies can be found at https://github.com/greenbone/gvmd/blob/stable/INSTALL.md#prerequisites-for-optional-features.

Downloading the gvmd sources
curl -f -L https://github.com/greenbone/gvmd/archive/refs/tags/v$GVMD_VERSION.tar.gz -o $SOURCE_DIR/gvmd-$GVMD_VERSION.tar.gz
curl -f -L https://github.com/greenbone/gvmd/releases/download/v$GVMD_VERSION/gvmd-$GVMD_VERSION.tar.gz.asc -o $SOURCE_DIR/gvmd-$GVMD_VERSION.tar.gz.asc
Verifying the source file
gpg --verify $SOURCE_DIR/gvmd-$GVMD_VERSION.tar.gz.asc $SOURCE_DIR/gvmd-$GVMD_VERSION.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signature is valid the tarball can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/gvmd-$GVMD_VERSION.tar.gz
Building gvmd
mkdir -p $BUILD_DIR/gvmd && cd $BUILD_DIR/gvmd

cmake $SOURCE_DIR/gvmd-$GVMD_VERSION \
  -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX \
  -DCMAKE_BUILD_TYPE=Release \
  -DLOCALSTATEDIR=/var \
  -DSYSCONFDIR=/etc \
  -DGVM_DATA_DIR=/var \
  -DGVMD_RUN_DIR=/run/gvmd \
  -DOPENVAS_DEFAULT_SOCKET=/run/ospd/ospd-openvas.sock \
  -DGVM_FEED_LOCK_PATH=/var/lib/gvm/feed-update.lock \
  -DSYSTEMD_SERVICE_DIR=/lib/systemd/system \
  -DLOGROTATE_DIR=/etc/logrotate.d

make -j$(nproc)
Installing gvmd
mkdir -p $INSTALL_DIR/gvmd

make DESTDIR=$INSTALL_DIR/gvmd install

sudo cp -rv $INSTALL_DIR/gvmd/* /

pg-gvm

pg-gvm is a PostgreSQL server extension that adds several functions used by gvmd, e.g., iCalendar and host range evaluation. In previous versions, these functions were managed directly by gvmd while pg-gvm uses the extension management built into PostgreSQL.

Setting the pg-gvm version to use
export PG_GVM_VERSION=22.6.5
Required dependencies for pg-gvm
sudo apt install -y \
  libglib2.0-dev \
  postgresql-server-dev-15 \
  libical-dev
Downloading the pg-gvm sources
curl -f -L https://github.com/greenbone/pg-gvm/archive/refs/tags/v$PG_GVM_VERSION.tar.gz -o $SOURCE_DIR/pg-gvm-$PG_GVM_VERSION.tar.gz
curl -f -L https://github.com/greenbone/pg-gvm/releases/download/v$PG_GVM_VERSION/pg-gvm-$PG_GVM_VERSION.tar.gz.asc -o $SOURCE_DIR/pg-gvm-$PG_GVM_VERSION.tar.gz.asc
Verifying the source file
gpg --verify $SOURCE_DIR/pg-gvm-$PG_GVM_VERSION.tar.gz.asc $SOURCE_DIR/pg-gvm-$PG_GVM_VERSION.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signature is valid the tarball can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/pg-gvm-$PG_GVM_VERSION.tar.gz

Afterwards, pg-gvm can be build and installed.

Building pg-gvm
mkdir -p $BUILD_DIR/pg-gvm && cd $BUILD_DIR/pg-gvm

cmake $SOURCE_DIR/pg-gvm-$PG_GVM_VERSION \
  -DCMAKE_BUILD_TYPE=Release

make -j$(nproc)
Installing pg-gvm
mkdir -p $INSTALL_DIR/pg-gvm

make DESTDIR=$INSTALL_DIR/pg-gvm install

sudo cp -rv $INSTALL_DIR/pg-gvm/* /

Greenbone Security Assistant

The Greenbone Security Assistant (GSA) sources consist of two parts:

  • Web server gsad

  • Web application GSA

GSA

The web application is written in JavaScript and relies on the react framework. It uses nodejs for building the application and yarn for maintaining the JavaScript dependencies. Because the installation of yarn and the specific nodejs version requires a setup of external package repositories and the build process takes a lot of time, pre-built distributable files are available. These pre-built distributable files are used in this docs.

Setting the GSA version to use
export GSA_VERSION=23.2.1
Downloading the gsa sources
curl -f -L https://github.com/greenbone/gsa/releases/download/v$GSA_VERSION/gsa-dist-$GSA_VERSION.tar.gz -o $SOURCE_DIR/gsa-$GSA_VERSION.tar.gz
curl -f -L https://github.com/greenbone/gsa/releases/download/v$GSA_VERSION/gsa-dist-$GSA_VERSION.tar.gz.asc -o $SOURCE_DIR/gsa-$GSA_VERSION.tar.gz.asc
Verifying the source files
gpg --verify $SOURCE_DIR/gsa-$GSA_VERSION.tar.gz.asc $SOURCE_DIR/gsa-$GSA_VERSION.tar.gz

The output of both commands should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signatures are valid, the two tarballs can be extracted.

mkdir -p $SOURCE_DIR/gsa-$GSA_VERSION
tar -C $SOURCE_DIR/gsa-$GSA_VERSION -xvzf $SOURCE_DIR/gsa-$GSA_VERSION.tar.gz
Installing gsa
sudo mkdir -p $INSTALL_PREFIX/share/gvm/gsad/web/
sudo cp -rv $SOURCE_DIR/gsa-$GSA_VERSION/* $INSTALL_PREFIX/share/gvm/gsad/web/

gsad

The web server gsad is written in the C programming language. It serves static content like images and provides an API for the web application. Internally it communicates with gvmd using GMP.

Setting the GSAd version to use
export GSAD_VERSION=22.11.0
Required dependencies for gsad
sudo apt install -y \
  libmicrohttpd-dev \
  libxml2-dev \
  libglib2.0-dev \
  libgnutls28-dev
Downloading the gsad sources
curl -f -L https://github.com/greenbone/gsad/archive/refs/tags/v$GSAD_VERSION.tar.gz -o $SOURCE_DIR/gsad-$GSAD_VERSION.tar.gz
curl -f -L https://github.com/greenbone/gsad/releases/download/v$GSAD_VERSION/gsad-$GSAD_VERSION.tar.gz.asc -o $SOURCE_DIR/gsad-$GSAD_VERSION.tar.gz.asc
Verifying the source files
gpg --verify $SOURCE_DIR/gsad-$GSAD_VERSION.tar.gz.asc $SOURCE_DIR/gsad-$GSAD_VERSION.tar.gz

The output of both commands should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signatures are valid, the two tarballs can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/gsad-$GSAD_VERSION.tar.gz
Building gsad
mkdir -p $BUILD_DIR/gsad && cd $BUILD_DIR/gsad

cmake $SOURCE_DIR/gsad-$GSAD_VERSION \
  -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX \
  -DCMAKE_BUILD_TYPE=Release \
  -DSYSCONFDIR=/etc \
  -DLOCALSTATEDIR=/var \
  -DGVMD_RUN_DIR=/run/gvmd \
  -DGSAD_RUN_DIR=/run/gsad \
  -DLOGROTATE_DIR=/etc/logrotate.d

make -j$(nproc)
Installing gsad
mkdir -p $INSTALL_DIR/gsad

make DESTDIR=$INSTALL_DIR/gsad install

sudo cp -rv $INSTALL_DIR/gsad/* /

openvas-smb

openvas-smb is a helper module for openvas-scanner. It includes libraries (openvas-wmiclient/openvas-wincmd) to interface with Microsoft Windows Systems through the Windows Management Instrumentation API and a winexe binary to execute processes remotely on that system.

It is an optional dependency of openvas-scanner but is required for scanning Windows-based systems.

Warning

openvas-smb doesn’t work on CentOS at the moment! It is not a hard requirement.

Setting the openvas-smb version to use
export OPENVAS_SMB_VERSION=22.5.3
Required dependencies for openvas-smb
sudo apt install -y \
  gcc-mingw-w64 \
  libgnutls28-dev \
  libglib2.0-dev \
  libpopt-dev \
  libunistring-dev \
  heimdal-dev \
  perl-base
Downloading the openvas-smb sources
curl -f -L https://github.com/greenbone/openvas-smb/archive/refs/tags/v$OPENVAS_SMB_VERSION.tar.gz -o $SOURCE_DIR/openvas-smb-$OPENVAS_SMB_VERSION.tar.gz
curl -f -L https://github.com/greenbone/openvas-smb/releases/download/v$OPENVAS_SMB_VERSION/openvas-smb-v$OPENVAS_SMB_VERSION.tar.gz.asc -o $SOURCE_DIR/openvas-smb-$OPENVAS_SMB_VERSION.tar.gz.asc
Verifying the source file
gpg --verify $SOURCE_DIR/openvas-smb-$OPENVAS_SMB_VERSION.tar.gz.asc $SOURCE_DIR/openvas-smb-$OPENVAS_SMB_VERSION.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signature is valid, the tarball can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/openvas-smb-$OPENVAS_SMB_VERSION.tar.gz
Building openvas-smb
mkdir -p $BUILD_DIR/openvas-smb && cd $BUILD_DIR/openvas-smb

cmake $SOURCE_DIR/openvas-smb-$OPENVAS_SMB_VERSION \
  -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX \
  -DCMAKE_BUILD_TYPE=Release

make -j$(nproc)
Installing openvas-smb
mkdir -p $INSTALL_DIR/openvas-smb

make DESTDIR=$INSTALL_DIR/openvas-smb install

sudo cp -rv $INSTALL_DIR/openvas-smb/* /

openvas-scanner

openvas-scanner is a full-featured scan engine that executes a continuously updated and extended feed of Vulnerability Tests (VTs). The feed consist of thousands of NASL (Network Attack Scripting Language) scripts which implement all kind of vulnerability checks.

Setting the openvas-scanner version to use
export OPENVAS_SCANNER_VERSION=23.8.2
Required dependencies for openvas-scanner
sudo apt install -y \
  bison \
  libglib2.0-dev \
  libgnutls28-dev \
  libgcrypt20-dev \
  libpcap-dev \
  libgpgme-dev \
  libksba-dev \
  rsync \
  nmap \
  libjson-glib-dev \
  libcurl4-gnutls-dev \
  libbsd-dev
Debian optional dependencies for openvas-scanner
sudo apt install -y \
  python3-impacket \
  libsnmp-dev
Downloading the openvas-scanner sources
curl -f -L https://github.com/greenbone/openvas-scanner/archive/refs/tags/v$OPENVAS_SCANNER_VERSION.tar.gz -o $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION.tar.gz
curl -f -L https://github.com/greenbone/openvas-scanner/releases/download/v$OPENVAS_SCANNER_VERSION/openvas-scanner-v$OPENVAS_SCANNER_VERSION.tar.gz.asc -o $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION.tar.gz.asc
Verifying the source file
gpg --verify $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION.tar.gz.asc $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signature is valid, the tarball can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION.tar.gz
Building openvas-scanner
mkdir -p $BUILD_DIR/openvas-scanner && cd $BUILD_DIR/openvas-scanner

cmake $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION \
  -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX \
  -DCMAKE_BUILD_TYPE=Release \
  -DINSTALL_OLD_SYNC_SCRIPT=OFF \
  -DSYSCONFDIR=/etc \
  -DLOCALSTATEDIR=/var \
  -DOPENVAS_FEED_LOCK_PATH=/var/lib/openvas/feed-update.lock \
  -DOPENVAS_RUN_DIR=/run/ospd

make -j$(nproc)
Installing openvas-scanner
mkdir -p $INSTALL_DIR/openvas-scanner

make DESTDIR=$INSTALL_DIR/openvas-scanner install

sudo cp -rv $INSTALL_DIR/openvas-scanner/* /

As of version 23.0 the openvasd_server configuration needs to be set to a running OpenVASD instance.

printf "table_driven_lsc = yes\n" | sudo tee /etc/openvas/openvas.conf
printf "openvasd_server = http://127.0.0.1:3000\n" | sudo tee -a /etc/openvas/openvas.conf

ospd-openvas

ospd-openvas is an OSP server implementation to allow gvmd to remotely control an openvas-scanner. It is running as a daemon and waits for incoming OSP requests from gvmd.

Setting the ospd and ospd-openvas versions to use
export OSPD_OPENVAS_VERSION=22.7.1
Required dependencies for ospd-openvas
sudo apt install -y \
  python3 \
  python3-pip \
  python3-setuptools \
  python3-packaging \
  python3-wrapt \
  python3-cffi \
  python3-psutil \
  python3-lxml \
  python3-defusedxml \
  python3-paramiko \
  python3-redis \
  python3-gnupg \
  python3-paho-mqtt
Downloading the ospd-openvas sources
curl -f -L https://github.com/greenbone/ospd-openvas/archive/refs/tags/v$OSPD_OPENVAS_VERSION.tar.gz -o $SOURCE_DIR/ospd-openvas-$OSPD_OPENVAS_VERSION.tar.gz
curl -f -L https://github.com/greenbone/ospd-openvas/releases/download/v$OSPD_OPENVAS_VERSION/ospd-openvas-v$OSPD_OPENVAS_VERSION.tar.gz.asc -o $SOURCE_DIR/ospd-openvas-$OSPD_OPENVAS_VERSION.tar.gz.asc
Verifying the source files
gpg --verify $SOURCE_DIR/ospd-openvas-$OSPD_OPENVAS_VERSION.tar.gz.asc $SOURCE_DIR/ospd-openvas-$OSPD_OPENVAS_VERSION.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signatures are valid, the tarballs can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/ospd-openvas-$OSPD_OPENVAS_VERSION.tar.gz
Installing ospd-openvas
cd $SOURCE_DIR/ospd-openvas-$OSPD_OPENVAS_VERSION

mkdir -p $INSTALL_DIR/ospd-openvas

python3 -m pip install --root=$INSTALL_DIR/ospd-openvas --no-warn-script-location .

sudo cp -rv $INSTALL_DIR/ospd-openvas/* /

openvasd

OpenVASD is used for detecting vulnerable products.

Currently only the notus is integrated into gvmd. That means that openvas is using openvasd for static version checks if a scan with ssh credentials is started and packages got found.

If you want to enable the full functionality you either need to adapt the openvasd.service file and remove the --mode service_notus flag and create a configuration file within /etc/openvasd/openvasd.toml or adapt the arguments within openvasd.service if you don’t want to create a configuration file.

For more information see:

  • https://greenbone.github.io/scanner-api/

  • https://github.com/greenbone/openvas-scanner/tree/main/rust/openvasd

  • https://github.com/greenbone/openvas-scanner/blob/main/rust/examples/openvasd/config.example.toml

Setting the openvas versions to use
export OPENVAS_DAEMON=23.8.2

Note

For debian and centos systems you have to follow rustup instructions because the default Rust version is too dated for OpenVASD

Required dependencies for openvasd
# Follow instuctions of https://rustup.rs

sudo apt install -y \
  pkg-config \
  libssl-dev
Downloading the openvas-scanner sources
curl -f -L https://github.com/greenbone/openvas-scanner/archive/refs/tags/v$OPENVAS_DAEMON.tar.gz -o $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON.tar.gz
curl -f -L https://github.com/greenbone/openvas-scanner/releases/download/v$OPENVAS_DAEMON/openvas-scanner-v$OPENVAS_DAEMON.tar.gz.asc -o $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON.tar.gz.asc
Verifying the source file
gpg --verify $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON.tar.gz.asc $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON.tar.gz

The output of the last command should be similar to:

gpg: Signature made Fri Apr 16 08:31:02 2021 UTC
gpg:                using RSA key 9823FAA60ED1E580
gpg: Good signature from "Greenbone Community Feed integrity key" [ultimate]

If the signature is valid, the tarball can be extracted.

tar -C $SOURCE_DIR -xvzf $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON.tar.gz

mkdir -p $INSTALL_DIR/openvasd/usr/local/bin
cd $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON/rust/openvasd
cargo build --release

cd $SOURCE_DIR/openvas-scanner-$OPENVAS_DAEMON/rust/scannerctl
cargo build --release

sudo cp -v ../target/release/openvasd $INSTALL_DIR/openvasd/usr/local/bin/
sudo cp -v ../target/release/scannerctl $INSTALL_DIR/openvasd/usr/local/bin/
sudo cp -rv $INSTALL_DIR/openvasd/* /

greenbone-feed-sync

The greenbone-feed-sync tool is a Python based script to download all feed data from the Greenbone Community Feed to your local machine. It is an improved version of two former shell scripts.

Note

greenbone-feed-sync is released independently of the Greenbone Community Edition. Therefore, the newest version is used.

Required dependencies for greenbone-feed-sync
sudo apt install -y \
  python3 \
  python3-pip

The latest version of greeenbone-feed-sync can be installed by using standard Python installation tool pip.

To install it system-wide for all users without running pip as root user, the following commands can be used:

Installing greenbone-feed-sync system-wide for all users
mkdir -p $INSTALL_DIR/greenbone-feed-sync

python3 -m pip install --root=$INSTALL_DIR/greenbone-feed-sync --no-warn-script-location greenbone-feed-sync

sudo cp -rv $INSTALL_DIR/greenbone-feed-sync/* /

gvm-tools

The Greenbone Vulnerability Management Tools, or gvm-tools in short, are a collection of tools that help with controlling Greenbone Community Edition installations or Greenbone Enterprise Appliances remotely.

Essentially, the tools aid accessing the communication protocols Greenbone Management Protocol (GMP) and Open Scanner Protocol (OSP).

gvm-tools are optional and not required for a functional GVM stack.

Note

gvm-tools is released independently of the Greenbone Community Edition. Therefore, the newest version is used.

Required dependencies for gvm-tools
sudo apt install -y \
  python3 \
  python3-pip \
  python3-venv \
  python3-setuptools \
  python3-packaging \
  python3-lxml \
  python3-defusedxml \
  python3-paramiko

The latest version of gvm-tools can be installed for each user via the standard Python installation tool pip.

Alternatively to install it system-wide without running pip as root user, the following commands can be used:

Installing gvm-tools system-wide
mkdir -p $INSTALL_DIR/gvm-tools

python3 -m pip install --root=$INSTALL_DIR/gvm-tools --no-warn-script-location gvm-tools

sudo cp -rv $INSTALL_DIR/gvm-tools/* /

Performing a System Setup

Setting up the Redis Data Store

Looking at the Architecture, the Redis key/value storage is used by the scanner (openvas-scanner and ospd-openvas) for handling the VT information and scan results.

Installing the Redis server
sudo apt install -y redis-server

After installing the Redis server package, a specific configuration for the openvas-scanner must be added.

Adding configuration for running the Redis server for the scanner
sudo cp $SOURCE_DIR/openvas-scanner-$OPENVAS_SCANNER_VERSION/config/redis-openvas.conf /etc/redis/
sudo chown redis:redis /etc/redis/redis-openvas.conf
echo "db_address = /run/redis-openvas/redis.sock" | sudo tee -a /etc/openvas/openvas.conf
Start redis with openvas config
sudo systemctl start redis-server@openvas.service
Ensure redis with openvas config is started on every system startup
sudo systemctl enable redis-server@openvas.service

Additionally the gvm user must be able to access the redis unix socket at /run/redis-openvas/redis.sock.

Adding the gvm user to the redis group
sudo usermod -aG redis gvm

Adjusting Permissions

For a system-wide multi-user installation, it must be ensured that the directory permissions are set correctly and are matching the group setup. All users of the group gvm should be able to read and write logs, lock files and data like VTs.

Adjusting directory permissions
sudo mkdir -p /var/lib/notus
sudo mkdir -p /run/gvmd

sudo chown -R gvm:gvm /var/lib/gvm
sudo chown -R gvm:gvm /var/lib/openvas
sudo chown -R gvm:gvm /var/lib/notus
sudo chown -R gvm:gvm /var/log/gvm
sudo chown -R gvm:gvm /run/gvmd

sudo chmod -R g+srw /var/lib/gvm
sudo chmod -R g+srw /var/lib/openvas
sudo chmod -R g+srw /var/log/gvm

To allow all users of the group gvm access to the postgres database via the various gvmd commands, the permissions of the gvmd executable will be adjusted to always run as the gvm user and under the gvm group.

Adjusting gvmd permissions
sudo chown gvm:gvm /usr/local/sbin/gvmd
sudo chmod 6750 /usr/local/sbin/gvmd

Feed Validation

For validating the feed content, a GnuPG keychain with the Greenbone Community Feed integrity key needs to be created.

Creating a GPG keyring for feed content validation
curl -f -L https://www.greenbone.net/GBCommunitySigningKey.asc -o /tmp/GBCommunitySigningKey.asc

export GNUPGHOME=/tmp/openvas-gnupg
mkdir -p $GNUPGHOME

gpg --import /tmp/GBCommunitySigningKey.asc
echo "8AE4BE429B60A59B311C2E739823FAA60ED1E580:6:" | gpg --import-ownertrust

export OPENVAS_GNUPG_HOME=/etc/openvas/gnupg
sudo mkdir -p $OPENVAS_GNUPG_HOME
sudo cp -r /tmp/openvas-gnupg/* $OPENVAS_GNUPG_HOME/
sudo chown -R gvm:gvm $OPENVAS_GNUPG_HOME

Setting up sudo for Scanning

For vulnerability scanning, it is required to have several capabilities for which only root users are authorized, e.g., creating raw sockets. Therefore, a configuration will be added to allow the users of the gvm group to run the openvas-scanner application as root user via sudo.

Warning

Make sure that only necessary users have access to the gvm group. Each user of the gvm group can manipulate the Vulnerability Test (VT) scripts (.nasl files). These scripts are run with root privileges and therefore can be used for exploits. See https://csal.medium.com/pentesters-tricks-local-privilege-escalation-in-openvas-fe933d7f161f.

sudo visudo

...

# allow users of the gvm group run openvas
%gvm ALL = NOPASSWD: /usr/local/sbin/openvas

Setting up PostgreSQL

The PostgreSQL database management system is used as a central storage for user and scan information. gvmd connects to a PostgreSQL database and queries the data. This database must be created and configured.

Installing the PostgreSQL server
sudo apt install -y postgresql

If necessary the PostgreSQL database server needs to be started manually

Starting the PostgreSQL database server
sudo systemctl start postgresql@15-main

For setting up the PostgreSQL database it is required to become the postgres user.

Changing to the postgres user
sudo -u postgres bash
Setting up PostgreSQL user and database for the Greenbone Community Edition
cd
createuser -DRS gvm
createdb -O gvm gvmd
Setting up database permissions and extensions
psql gvmd -c "create role dba with superuser noinherit; grant dba to gvm;"

exit

Setting up an Admin User

For accessing and configuring the vulnerability data, an administrator user needs to be created. This user can log in via the Greenbone Security Assistant (GSA) web interface. They will have access to all data and will later be configured to act as the Feed Import Owner.

Creating an administrator user with generated password
/usr/local/sbin/gvmd --create-user=admin

The new administrator user’s password is printed on success. An administrator user can later create further users or administrators via the GSA web interface.

To create the administrator user with a password of your choice instead of the generated password, the following command can be used:

Creating an administrator user with provided password
/usr/local/sbin/gvmd --create-user=admin --password='<password>'

Note

Please be aware if your password includes special characters like $ it needs to be quoted in single quotes.

If the output doesn’t show

User created.

you need to look at the /var/log/gvm/gvmd.log for errors.

Setting the Feed Import Owner

Certain resources that were previously part of the gvmd source code are now shipped via the feed. An example is the scan configuration “Full and Fast”.

Currently every resource needs an owner to apply the permissions and manage the access to the resources.

Therefore, gvmd will only create these resources if a Feed Import Owner is configured. Here the previously created admin user will be used as the Feed Import Owner.

Setting the Feed Import Owner
/usr/local/sbin/gvmd --modify-setting 78eceaec-3385-11ea-b237-28d24461215b --value `/usr/local/sbin/gvmd --get-users --verbose | grep admin | awk '{print $2}'`

Setting up Services for Systemd

Systemd is used to start the daemons ospd-openvas, openvasd, gvmd and gsad. Therefore, service files are required.

Systemd service file for ospd-openvas
cat << EOF > $BUILD_DIR/ospd-openvas.service
[Unit]
Description=OSPd Wrapper for the OpenVAS Scanner (ospd-openvas)
Documentation=man:ospd-openvas(8) man:openvas(8)
After=network.target networking.service redis-server@openvas.service openvasd.service
Wants=redis-server@openvas.service openvasd.service
ConditionKernelCommandLine=!recovery

[Service]
Type=exec
User=gvm
Group=gvm
RuntimeDirectory=ospd
RuntimeDirectoryMode=2775
PIDFile=/run/ospd/ospd-openvas.pid
ExecStart=/usr/local/bin/ospd-openvas --foreground --unix-socket /run/ospd/ospd-openvas.sock --pid-file /run/ospd/ospd-openvas.pid --log-file /var/log/gvm/ospd-openvas.log --lock-file-dir /var/lib/openvas --socket-mode 0o770 --notus-feed-dir /var/lib/notus/advisories
SuccessExitStatus=SIGKILL
Restart=always
RestartSec=60

[Install]
WantedBy=multi-user.target
EOF
Install systemd service file for ospd-openvas
sudo cp -v $BUILD_DIR/ospd-openvas.service /etc/systemd/system/
Systemd service file for gvmd
cat << EOF > $BUILD_DIR/gvmd.service
[Unit]
Description=Greenbone Vulnerability Manager daemon (gvmd)
After=network.target networking.service postgresql.service ospd-openvas.service
Wants=postgresql.service ospd-openvas.service
Documentation=man:gvmd(8)
ConditionKernelCommandLine=!recovery

[Service]
Type=exec
User=gvm
Group=gvm
PIDFile=/run/gvmd/gvmd.pid
RuntimeDirectory=gvmd
RuntimeDirectoryMode=2775
ExecStart=/usr/local/sbin/gvmd --foreground --osp-vt-update=/run/ospd/ospd-openvas.sock --listen-group=gvm
Restart=always
TimeoutStopSec=10

[Install]
WantedBy=multi-user.target
EOF
Install systemd service file for gvmd
sudo cp -v $BUILD_DIR/gvmd.service /etc/systemd/system/
Systemd service file for gsad
cat << EOF > $BUILD_DIR/gsad.service
[Unit]
Description=Greenbone Security Assistant daemon (gsad)
Documentation=man:gsad(8) https://www.greenbone.net
After=network.target gvmd.service
Wants=gvmd.service

[Service]
Type=exec
User=gvm
Group=gvm
RuntimeDirectory=gsad
RuntimeDirectoryMode=2775
PIDFile=/run/gsad/gsad.pid
ExecStart=/usr/local/sbin/gsad --foreground --listen=127.0.0.1 --port=9392 --http-only
Restart=always
TimeoutStopSec=10

[Install]
WantedBy=multi-user.target
Alias=greenbone-security-assistant.service
EOF
Install systemd service file for gsad
sudo cp -v $BUILD_DIR/gsad.service /etc/systemd/system/

Afterwards, the services need to be activated and started.

Making systemd aware of the new service files
sudo systemctl daemon-reload
Systemd service file for openvasd
cat << EOF > $BUILD_DIR/openvasd.service
[Unit]
Description=OpenVASD
Documentation=https://github.com/greenbone/openvas-scanner/tree/main/rust/openvasd
ConditionKernelCommandLine=!recovery
[Service]
Type=exec
User=gvm
RuntimeDirectory=openvasd
RuntimeDirectoryMode=2775
ExecStart=/usr/local/bin/openvasd --mode service_notus --products /var/lib/notus/products --advisories /var/lib/notus/advisories --listening 127.0.0.1:3000
SuccessExitStatus=SIGKILL
Restart=always
RestartSec=60
[Install]
WantedBy=multi-user.target
EOF
Install systemd service file for openvasd
sudo cp -v $BUILD_DIR/openvasd.service /etc/systemd/system/

Performing a Feed Synchronization

For the actual vulnerability scanning, Vulnerability Test scripts, security information like CVEs, port lists and scan configurations are required. All this data is provided by the Greenbone Community Feed and should be downloaded initially before starting the services.

A synchronization always consists of two parts:

  1. Downloading the changes via rsync

  2. Loading the changes into memory and a database by a daemon

Both steps may take a while, from several minutes up to hours, especially for the initial synchronization. Only if both steps are finished, the synchronized data is up-to-date and can be used.

The first step is done via the greenbone-feed-sync script. The second step is done automatically when the daemons are started.

Downloading the Data

Note

Downloading the data during the synchronization may take a while depending on the network connection and server resources.

The downloaded data consist of four different kind of data:

  • VT data

  • SCAP data

  • CERT data

  • GVMD data

VT data contain .nasl and .notus files for creating results during a vulnerability scan. The .nasl files are processed by the OpenVAS Scanner and the .notus files by the Notus Scanner.

SCAP data contains CPE and CVE information.

CERT data contain vulnerability information from the German DFN-CERT and CERT-Bund agencies.

GVMD data (or also called “data objects”) are scan configurations, compliance policies, port lists and report formats.

Downloading the data from the Greenbone Community Feed
sudo /usr/local/bin/greenbone-feed-sync

Starting the Greenbone Community Edition Services

Important

When the feed content has been downloaded, the new data must be loaded by the corresponding daemons. This may take several minutes up to hours, especially for the initial loading of the data. Without loaded data, scans will contain incomplete and erroneous results.

After starting the Greenbone Community Edition services via systemd, the running daemons will pick up the feed content and load the data automatically.

Warning

Please be aware, even if the systemctl start commands are returning immediately, the first startup of the services may take several minutes or even hours!

Finally starting the services
sudo systemctl start ospd-openvas
sudo systemctl start gvmd
sudo systemctl start gsad
sudo systemctl start openvasd
Ensuring services are run at every system startup
sudo systemctl enable ospd-openvas
sudo systemctl enable gvmd
sudo systemctl enable gsad
sudo systemctl enable openvasd
Checking the status of the services
sudo systemctl status ospd-openvas
sudo systemctl status gvmd
sudo systemctl status gsad
sudo systemctl status openvasd

Vulnerability Tests Data

If the log file of ospd-openvas (/var/log/gvm/ospd-openvas.log) contains the following output, the OpenVAS Scanner starts to load the new VT data:

ospd-openvas VT loading log message
Loading VTs. Scans will be [requested|queued] until VTs are loaded. This may
take a few minutes, please wait ...

The loading of the VT data is finished if the following log message can be found:

ospd-openvas VTs loading finished log message
Finished loading VTs. The VT cache has been updated from version X to Y.

After the scanner is aware of the VT data, the data will be requested by gvmd. This will result in the following log message in /var/log/gvm/gvmd.log:

gvmd VTs loading log message
OSP service has different VT status (version X) from database (version (Y), Z VTs). Starting update ...

When gvmd has finished loading all VTs, the following message appears:

gvmd VTs loading finished log message
Updating VTs in database ... done (X VTs).

SCAP Data

gvmd starts loading the SCAP data containing CPE and CVE information when the following message can be found in the logs (/var/log/gvm/gvmd.log):

gvmd SCAP data loading log message
update_scap: Updating data from feed

The SCAP data is loaded and the synchronization is finished when the (gvmd) log contains the following message:

gvmd SCAP data loading finished log message
update_scap_end: Updating SCAP info succeeded

CERT Data

gvmd starts loading the CERT data containing DFN-CERT and CERT-Bund advisories when the following message can be found in the logs (/var/log/gvm/gvmd.log):

gvmd CERT data loading log message
sync_cert: Updating data from feed

The CERT data is loaded and the synchronization is finished when the (gvmd) log contains the following message:

gvmd CERT data finished loading log message
sync_cert: Updating CERT info succeeded.

GVMD Data

The log (/var/log/gvm/gvmd.log) contains several messages when the gvmd data is loaded. For port lists, these messages are similar to:

gvmd port list loaded log message
Port list All IANA assigned TCP (33d0cd82-57c6-11e1-8ed1-406186ea4fc5) has been created by admin

For report formats:

gvmd report format loaded log message
Report format XML (a994b278-1f62-11e1-96ac-406186ea4fc5) has been created by admin

Hint

Scan Configs can only be loaded if the VT data is available in gvmd and a Feed Import Owner is set.

For scan configs:

gvmd scan config loaded log message
Scan config Full and fast (daba56c8-73ec-11df-a475-002264764cea) has been created by admin

Starting the Vulnerability Management

After the services have started and all data has been loaded, the Greenbone Security Assistant web interface – GSA – can be opened in the browser.

Opening Greenbone Security Assistant in the browser
xdg-open "http://127.0.0.1:9392" 2>/dev/null >/dev/null &

The browser will show the login page of GSA and after using the credentials created in the Setting Up an Admin User chapter, it is possible to start with the vulnerability scanning.

Launching Greenbone Security Assistant for the first time

Greenbone Security Assistant after logging in for the first time